Agenda

March 16 | Pre-Networking Evening Event

March 17-18 | Conference, exhibition & B2B matchmaking, AM tours

Boosting AM applications in industrial production

Under this motto, the 2-day English-language conference program is grouped along the following main topics:

Starting with AM

Volume and series production

Politics, standards and ecosystems

Special Networking Opportunities

Pre-event reception 16.03. | 18.00-22.00

Start networking the evening before, before the event has even begun! Don't miss out on the pre-event @Hotel Adlon Berlin!
More info

AM Tours 18.03. | 15.00-17.30

Round off your conference visit with an excursion. Take a look at the sites of Gefertec, Quantica, BAM or the BMW motorcycle plant in Berlin.
More info

Women in AM Luncheon 17.03. | 12.00-14.00

Be inspired by other female AM experts and managers and network with each other in an exclusive atmosphere!
More info

Agenda

Day 1 | Day 2

Day 1 | Monday, March 17, 2025

Main Stage

08.00 - 09.00

Check-in, morning coffee and networking in the exhibition
Estrel Congress Center, Sonnenallee 225, 12057 Berlin
Estrel Congress Center, Sonnenallee 225, 12057 Berlin
09.00 - 09.20

Welcome and networking kick-off
Daniel Wäldchen
Member of the Executive Board, IPM AG
Daniel Wäldchen
Member of the Executive Board, IPM AG

09.20 - 09.40

Starting with AM

KEYNOTE | Q&A | CONSUMER GOODS

Scaling AM production through collaboration: Unlocking new possibilities in sport applications with "Something Added"

	Romain Adamowicz Co-founder & Co-CEO, SomethingAdded
	Romain Adamowicz Co-founder & Co-CEO, SomethingAdded
	Francois Minec VP and Head of Global Business Development, HP Additive Manufacturing Solutions
	Francois Minec VP and Head of Global Business Development, HP Additive Manufacturing Solutions

09.40 - 10.00Volume and series production

KEYNOTE | Q&A | CONSUMER GOODS

Additive Manufacturing at scale - AM for consumer goods: The case of The LEGO Group
Ronen Hadar
Senior Director - Additive Design & Manufacturing, The LEGO Group
Ronen Hadar
Senior Director - Additive Design & Manufacturing, The LEGO Group

10.00 - 10.40

Politics, standards and ecosystems

PANEL DISCUSSION | Q&A | CROSS-INDUSTRY

Boosting AM series application: European R&D and funding programs in the global race

	Mans Lindberg Policy Officer, European Commission
	Mans Lindberg Policy Officer, European Commission
	Dr. Mohsen Seifi Vice President, Global Advanced Manufacturing Programs, ASTM International
	Dr. Mohsen Seifi Vice President, Global Advanced Manufacturing Programs, ASTM International
	Johannes Siegert eXpert Direct Manufacturing Technologies, Airbus Helicopters Germany
	Johannes Siegert eXpert Direct Manufacturing Technologies, Airbus Helicopters Germany
	Moderation: Prof. Dr. Christian Seidel Professor & Head of Smart Manufacturing Lab, Munich University \| Consultant, Wohlers Associates
	Moderation: Prof. Dr. Christian Seidel Professor & Head of Smart Manufacturing Lab, Munich University \| Consultant, Wohlers Associates

10.40 - 11.20

Coffee break and networking in the exhibition

11.00 - 11.10
AUTOMOTIVE - Industry Meetup in the B2B Area

11.20 - 11.55

Volume and series production

PANEL | Q&A | TRANSPORT

The potential super user industry public transport: Status quo and demands for the next years

	Dr. Claire Blanchard Direction digital et innovation \| Responsable programme innovation fabrication additive, RATP Group
	Dr. Claire Blanchard Direction digital et innovation \| Responsable programme innovation fabrication additive, RATP Group
	Franziska Dietrich Engineer, Wiener Linien
	Franziska Dietrich Engineer, Wiener Linien
	Dr. Lorenzo Gasparoni Schematics & Apparatus Leader - 3D Printing Senior Expert, Alstom
	Dr. Lorenzo Gasparoni Schematics & Apparatus Leader - 3D Printing Senior Expert, Alstom
	Moderation: Stefanie Brickwede Managing Director, Mobility goes Additive e.V.
	Moderation: Stefanie Brickwede Managing Director, Mobility goes Additive e.V.

11.55 - 12.15Volume and series production

KEYNOTE | Q&A | DEFENSE

Additive manufacturing for defense applications - Mission (im)possible?
Dr. Jens Holtmannspoetter
Branch Head of Materials, Structures, Engineering, Bundeswehr
Dr. Jens Holtmannspoetter
Branch Head of Materials, Structures, Engineering, Bundeswehr
12.15 - 12.35Volume and series production

KEYNOTE | Q&A | DEFENSE

AM for defense - An OEM perspective
Dr. Philip Evegren
Technical Manager, Aeronautics Center for Additive Manufacturing, SAAB
Dr. Philip Evegren
Technical Manager, Aeronautics Center for Additive Manufacturing, SAAB
12.35 - 12.45Volume and series production

PRESENTATION | TRANSPORT

Reinventing roller coasters - Using an end-to-end metal AM process to improve boogies for roller coaster trains
Dr. Simone Bernardini
CTO, EME Extreme Manufacturing Engineering
Dr. Simone Bernardini
CTO, EME Extreme Manufacturing Engineering

in cooperation with
in cooperation with
12.00 - 14.00Inspiring Talks, Networking & Lunch | Room Paris

Women in AM Luncheon: 50+ female AM leaders meet and discuss

Impulse Talk
Brigitte de Vet-Veithen
CEO, Materialise
Impulse Talk
Brigitte de Vet-Veithen
CEO, Materialise
12.45 - 13.40

Lunch break and networking in the exhibition

12.50 - 13.40
TECH TALKS at Expert Stage

13.00 - 13.10
CONSUMER GOODS - Industry Meetup in the B2B Area
13.40 - 14.00Volume and series production

KEYNOTE | Q&A | ENERGY

Serial production of gas turbine components: From material and process development to quality control and cost optimization
Dr. Sebastian Piegert
Global Function Lead Additive Manufacturing Technologies, Siemens Energy
Dr. Sebastian Piegert
Global Function Lead Additive Manufacturing Technologies, Siemens Energy

14.00 - 15.00

Volume and series production

IMPULSE SESSION | Q&A | CROSS-INDUSTRY

AM meets AI - what to expect?

	Moderation: Sven Krause SK Consulting
	Moderation: Sven Krause SK Consulting
14.00 - 14.15 From 3D scan to personalized 3D printed shoe
	Marc Schoemann CTO, Zellerfeld
14.00 - 14.15 From 3D scan to personalized 3D printed shoe
	Marc Schoemann CTO, Zellerfeld
	Dr. Matthias Brueck Head of Department Virtualization, Fraunhofer IAPT
	Dr. Matthias Brueck Head of Department Virtualization, Fraunhofer IAPT
14.15 - 14.30 How AI copilots are enabling the AM industry scaling: Case studies
	Dr. Omar Fergani Founder & CEO, 1000 Kelvin
14.15 - 14.30 How AI copilots are enabling the AM industry scaling: Case studies
	Dr. Omar Fergani Founder & CEO, 1000 Kelvin
	Heiko Witte Managing Director, Chesco GmbH / Center for Hybrid-Electric Systems Cottbus
	Heiko Witte Managing Director, Chesco GmbH / Center for Hybrid-Electric Systems Cottbus
14.30 - 14.45 Smart manufacturing with AI: Achieving reliable, stable and scalable batch-size-one production
	Lars Windels Managing Director PLM, SWMS Systemtechnik Ingenieurgesellschaft mbH
14.30 - 14.45 Smart manufacturing with AI: Achieving reliable, stable and scalable batch-size-one production
	Lars Windels Managing Director PLM, SWMS Systemtechnik Ingenieurgesellschaft mbH
14.45 - 15.00 Beyond the hype: AI's real impact on large-scale additive manufacturing
	Stefan Weyrich VP EMEA, Aibuild
14.45 - 15.00 Beyond the hype: AI's real impact on large-scale additive manufacturing
	Stefan Weyrich VP EMEA, Aibuild

15.00 - 15.30

Coffee break and networking in the exhibition

15.30 - 17.00
Workshop #1 Room Paris, Workshop #2 Room Strasbourg

15.50 - 17.00
TECH TALKS at Expert Stage

15.30 - 16.00

Volume and series production

PANEL | Q&A | DEFENSE

The role of AM in defense logistics

	Mike Efthymiadis Head of Customer Service Digital Innovation & Life Cycle Management, General Dynamics European Land Systems
	Mike Efthymiadis Head of Customer Service Digital Innovation & Life Cycle Management, General Dynamics European Land Systems
	Calum Stewart Director Defense Programs EMEA, SPEE3D
	Calum Stewart Director Defense Programs EMEA, SPEE3D
	Jostein Olsen CEO, Fieldmade
	Jostein Olsen CEO, Fieldmade
	Moderation: Dr. Stephan Beyer Advisor
	Moderation: Dr. Stephan Beyer Advisor

17.00 - 17.30

Coffee break and networking in the exhibition

17.10 - 17.20
RAILWAY - Industry Meetup in the B2B Area
DEFENSE - Industry Meetup at Expert Stage

17.30 - 17.45

Volume and series production

EXPERT INTERVIEW | Q&A | CROSS-INDUSTRY

Driving innovation in material solutions for Additive Manufacturing

	Colin Hautz CEO, ArcelorMittal Powders
	Colin Hautz CEO, ArcelorMittal Powders
	Alexandre Tartas HP Global Head of GTM Metal 3D Printing , HP Inc.
	Alexandre Tartas HP Global Head of GTM Metal 3D Printing , HP Inc.
	Moderation: Sven Krause SK Consulting
	Moderation: Sven Krause SK Consulting

17.45 - 18.05Volume and series production

KEYNOTE | Q&A | AUTOMOTIVE

How IT projects fail in additive manufacturing
Dr. Joel Bachmann
Project Lead Digitalization, Additive Manufacturing Campus, BMW Group
Dr. Joel Bachmann
Project Lead Digitalization, Additive Manufacturing Campus, BMW Group
18.05 - 22.00Networking

AFTER WORK PARTY

Evening reception in the exhibition with flying dinner, cocktails, music and networking
sponsored by druckerfachmann.de
sponsored by druckerfachmann.de

Expert Stage

11.20 - 12.20

Expert Stage [parallel session]

PRESENTATIONS

AMBER [Additive Manufacturing in Berlin-Brandenburg] project presentations

	Moderation: Leon Tillmann Manager Manufacturing Industries, AMBER Coordination and Innovation Support, Berlin Partner for Business and Technology
	Moderation: Leon Tillmann Manager Manufacturing Industries, AMBER Coordination and Innovation Support, Berlin Partner for Business and Technology
11.20 - 11.30 Project 1: optiMAL - Optimization of manufacturing processes for additive laser applications
	Dr. Katharina Eissing Founder & CTO, 1000 Kelvin
11.20 - 11.30 Project 1: optiMAL - Optimization of manufacturing processes for additive laser applications
	Dr. Katharina Eissing Founder & CTO, 1000 Kelvin
11.30 - 11.40 Project 2: MikroG - Ultra-compact production cell for filament-based manufacturing of metallic/ceramic components under microgravity conditions
	Leighton Clague Project Engineer, R&D Additive Manufacturing, XERION BERLIN LABORATORIES GmbH
11.30 - 11.40 Project 2: MikroG - Ultra-compact production cell for filament-based manufacturing of metallic/ceramic components under microgravity conditions
	Leighton Clague Project Engineer, R&D Additive Manufacturing, XERION BERLIN LABORATORIES GmbH
	Yassin Saber Research Associate, Federal Institute for Materials Research and Testing (BAM)
	Yassin Saber Research Associate, Federal Institute for Materials Research and Testing (BAM)
11.40 - 11.50 Project 3: ESAF - Development of an integrative satellite structure through the use of additive manufacturing processes
	Alejandro Cervantes Herrera Lead Mechanical Engineer, Reflex Aerospace GmbH
11.40 - 11.50 Project 3: ESAF - Development of an integrative satellite structure through the use of additive manufacturing processes
	Alejandro Cervantes Herrera Lead Mechanical Engineer, Reflex Aerospace GmbH
	Dr. Tim Lantzsch Head of Department - Laser Powder Bed Fusion, Fraunhofer Institute for Laser Technology ILT
	Dr. Tim Lantzsch Head of Department - Laser Powder Bed Fusion, Fraunhofer Institute for Laser Technology ILT
11.50 - 12.00 Project 4 - SAMBA - Efficient additive manufacturing of aluminum at peak absorption using a compact 1 kW diode laser module emitting at 780nm
	Holger Alder Managing Director, Photon Laser Manufacturing AG
11.50 - 12.00 Project 4 - SAMBA - Efficient additive manufacturing of aluminum at peak absorption using a compact 1 kW diode laser module emitting at 780nm
	Holger Alder Managing Director, Photon Laser Manufacturing AG
12.00 - 12.10 Project 5 - MultiCarb3DBeton - New insights into 3D printing of concrete with fiber reinforcement
	Prof. Dietmar Stephan Head of Chair of Building Physics and Building Constructions, Technical University Berlin
12.00 - 12.10 Project 5 - MultiCarb3DBeton - New insights into 3D printing of concrete with fiber reinforcement
	Prof. Dietmar Stephan Head of Chair of Building Physics and Building Constructions, Technical University Berlin
12.10 - 12.20 Project 6 - ProAStra Dental - Additive/subtractive manufacturing of root analog implants
	Prof. Dr. Andreas Schwitalla Chair of Digital Implantology, Charité-Universitätsmedizin Berlin
12.10 - 12.20 Project 6 - ProAStra Dental - Additive/subtractive manufacturing of root analog implants
	Prof. Dr. Andreas Schwitalla Chair of Digital Implantology, Charité-Universitätsmedizin Berlin
	Rafik Akhmad Research Associate, Charité-Universitätsmedizin Berlin
	Rafik Akhmad Research Associate, Charité-Universitätsmedizin Berlin

12.50 - 13.40

Expert Stage [parallel session]

TECH TALKS

Exhibitors present latest innovations

	Moderation: Stefan Ritt Lecturer, Technical University of Luebeck & AMUG Dino
	Moderation: Stefan Ritt Lecturer, Technical University of Luebeck & AMUG Dino
12.50 - 13.00 Materials by recipe: Powder kit for more flexibility and material diversity in 3D printing
	Michael Norda Project Manager Additive Manufacturing, Fraunhofer IFAM
12.50 - 13.00 Materials by recipe: Powder kit for more flexibility and material diversity in 3D printing
	Michael Norda Project Manager Additive Manufacturing, Fraunhofer IFAM
13.00 - 13.10 Safe filtration of condensates in metal powder bed fusion
	Maximilian Roesch Technical Sales Engineer for Additive Manufacturing, Herding GmbH Filtertechnik
13.00 - 13.10 Safe filtration of condensates in metal powder bed fusion
	Maximilian Roesch Technical Sales Engineer for Additive Manufacturing, Herding GmbH Filtertechnik
13.10 - 13.20 Industrial innovation through Additive Manufacturing technologies
	Mario Martínez Ceniceros Head of applications, AIDIMME
13.10 - 13.20 Industrial innovation through Additive Manufacturing technologies
	Mario Martínez Ceniceros Head of applications, AIDIMME
13.20 - 13.30 Talk
	Dr. Nicolai Lammert Managing Director, Yizumi Germany GmbH
13.20 - 13.30 Talk
	Dr. Nicolai Lammert Managing Director, Yizumi Germany GmbH
13.30 - 13.40 Rethinking additive manufacturing: Established processes for innovative applications
	Oliver Refle Senior Manager Research Unit Manufacturing and Process Technology, Fraunhofer IPA
13.30 - 13.40 Rethinking additive manufacturing: Established processes for innovative applications
	Oliver Refle Senior Manager Research Unit Manufacturing and Process Technology, Fraunhofer IPA

15.50 - 17.00

Expert Stage [parallel session]

TECH TALKS

Exhibitors present latest innovations

15.50 - 16.00 Closed loop powder handling in additive manufacturing
	Manuel Henser Senior Expert Advanced Solutions, Volkmann GmbH
15.50 - 16.00 Closed loop powder handling in additive manufacturing
	Manuel Henser Senior Expert Advanced Solutions, Volkmann GmbH
16.00 - 16.10 Revolutionizing post-processing in metal 3D printing: Boosting efficiency and flexibility
	Jessica Parrilla Product Manager, ANDREAS MAIER GMBH & CO. KG
16.00 - 16.10 Revolutionizing post-processing in metal 3D printing: Boosting efficiency and flexibility
	Jessica Parrilla Product Manager, ANDREAS MAIER GMBH & CO. KG
16.10 - 16.20 Managing AM-supported supply chains: Insights from the semiconductor industry
	Gregor Reischle CEO, Qualified AM GmbH
16.10 - 16.20 Managing AM-supported supply chains: Insights from the semiconductor industry
	Gregor Reischle CEO, Qualified AM GmbH
16.20 - 16.30 Sinter-based additive manufacturing of titanium components
	Dr. David Gerbert Division Manager Additive Manufacturing, MIMplus Technologies GmbH & Co. KG
16.20 - 16.30 Sinter-based additive manufacturing of titanium components
	Dr. David Gerbert Division Manager Additive Manufacturing, MIMplus Technologies GmbH & Co. KG
16.30 - 16.40 Innovation in industrial production: Inkjet's role in the future of Additive Manufacturing, functional coatings and adhesives
	Georg Boedler CEO, INKATRONIC GmbH
16.30 - 16.40 Innovation in industrial production: Inkjet's role in the future of Additive Manufacturing, functional coatings and adhesives
	Georg Boedler CEO, INKATRONIC GmbH
16.40 - 16.50 Metal powders for Powder Bed Fusion - Laser Beam and Binder Jetting, with a focus on grades suitable mold tooling
	Dr. Paul Davies Business Development Manager, INDO MIM
16.40 - 16.50 Metal powders for Powder Bed Fusion - Laser Beam and Binder Jetting, with a focus on grades suitable mold tooling
	Dr. Paul Davies Business Development Manager, INDO MIM
16.50 - 17.00 How to achieve consistent quality and fast ROI with LPBF
	Enis Jost Deputy General Manager, Eplus3D Tech GmbH
16.50 - 17.00 How to achieve consistent quality and fast ROI with LPBF
	Enis Jost Deputy General Manager, Eplus3D Tech GmbH

17.10 - 17.20Expert Stage & Exhibition

INDUSTRY MEETUPS

Workshops & Small Groups

12.00 - 14.00Inspiring Talks, Networking & Lunch | Room Paris

Women in AM Luncheon: 50+ female AM leaders meet and discuss

Impulse Talk
Brigitte de Vet
CEO, Materialise
Impulse Talk
Brigitte de Vet
CEO, Materialise

15.30 - 17.00

Working Session [parallel session]

WORKSHOP #1 | Room Paris

Applying AM to the factory floor

[1] High-impact AM use cases
[2] Overcoming Barriers to AM Adoption
[3] Scaling AM from Prototyping to Series Production
[4] Ensuring Quality, Certification, and Standards in AM
[5] The AM-Enabled Smart Factory of the Future

	Moderation: Prof. Dr. Jens Telgkamp Professor for Additive Manufacturing, HAW Hamburg (University of Applied Science)
	Moderation: Prof. Dr. Jens Telgkamp Professor for Additive Manufacturing, HAW Hamburg (University of Applied Science)
	Florian Holzhoffer Head of Sales Additive Manufacturing, TRUMPF Laser- und Systemtechnik GmbH
	Florian Holzhoffer Head of Sales Additive Manufacturing, TRUMPF Laser- und Systemtechnik GmbH
	Mathieu Perennou Global Director Additive Manufacturing Solutions, Hexagon Manufacturing Intelligence
	Mathieu Perennou Global Director Additive Manufacturing Solutions, Hexagon Manufacturing Intelligence
	Christoph Voelcker Teamleader 3D Printing, Würth Elektronik Group
	Christoph Voelcker Teamleader 3D Printing, Würth Elektronik Group
	Dr. Ole von Seelen Chief Commercial Officer, trinckle 3D GmbH
	Dr. Ole von Seelen Chief Commercial Officer, trinckle 3D GmbH

15.30 - 17.00

Working Session [parallel session]

WORKSHOP #2 | Room Strasbourg

Failure session - Personal discussions on AM failures

[1] Technical Challenges
[2] Economic Barriers, Cost-Benefit Analysis and Expectation Management
[3] Quality Management, Failure Analysis and Quality Standards
[4] Organizational Barriers and Communication with Suppliers

	Moderation: Sven Krause SK Consulting
	Moderation: Sven Krause SK Consulting
	Arvid Eirich Head of Additive Manufacturing, Deutsche Bahn
	Arvid Eirich Head of Additive Manufacturing, Deutsche Bahn
	Benjamin Haller Managing Director, AM Academy
	Benjamin Haller Managing Director, AM Academy
	Dr. Sascha Hartig Head of Naval Engineering Principles & Additive Manufacturing, German Navy
	Dr. Sascha Hartig Head of Naval Engineering Principles & Additive Manufacturing, German Navy
	Andrea Russo AM Customer Engagement Leader, Enterprise Operational Excellence, Baker Hughes
	Andrea Russo AM Customer Engagement Leader, Enterprise Operational Excellence, Baker Hughes

Day 2 | Tuesday, March 18, 2025

Main Stage

08.00 - 09.00

Check-in, morning coffee and networking in the exhibition
Estrel Congress Center, Sonnenallee 225, 12057 Berlin
Estrel Congress Center, Sonnenallee 225, 12057 Berlin
09.00 - 09.10

Day 2 Opening: Recap and market outlook
Sven Krause
Moderator, SK Consulting
Sven Krause
Moderator, SK Consulting

Matthias Schmidt-Lehr
Managing Partner, AMPOWER GmbH & Co. KG
Matthias Schmidt-Lehr
Managing Partner, AMPOWER GmbH & Co. KG

09.10 - 09.30

Volume and series production

KEYNOTE | Q&A | AEROSPACE

Beyond earth: Advancing space technology with metal AM

	Dr. Steffen Beyer Manager of the Cold Spray Additive Manufacturing (CSAM) Factory / Expert Production Processes & Industrialization AM, ArianeGroup
	Dr. Steffen Beyer Manager of the Cold Spray Additive Manufacturing (CSAM) Factory / Expert Production Processes & Industrialization AM, ArianeGroup
	Joachim Zettler Chief Business Officer Metal Solutions, EOS Group
	Joachim Zettler Chief Business Officer Metal Solutions, EOS Group

09.30 - 09.50Volume and series production

KEYNOTE | Q&A | AVIATION

Directed Energy Deposition (DED) in serial production for the A350 - Replacing titanium forged parts
Dr. Jan Hoennige
Head of Industrialization DED, Airbus Aerostructures
Dr. Jan Hoennige
Head of Industrialization DED, Airbus Aerostructures

09.50 - 10.30

Automation and volume production

PANEL | Q&A | CROSS-INDUSTRY

Future of design and engineering workflows for advanced part manufacturing

	Julia Fröhlich Director Innovation Hub, Harting
	Julia Fröhlich Director Innovation Hub, Harting
	Dr. Jana Kirchheim Director Manufacturing, Microsoft
	Dr. Jana Kirchheim Director Manufacturing, Microsoft
	Maximilian Strixner Senior AM Engineer, The Exploration Company
	Maximilian Strixner Senior AM Engineer, The Exploration Company
	Moderation: Dr. Karsten Heuser VP Additive Manufacturing, Siemens Digital Industries
	Moderation: Dr. Karsten Heuser VP Additive Manufacturing, Siemens Digital Industries

10.30 - 11.15

Coffee break and networking in the exhibition

10.50 - 11.00 AVIATION - Industry Meetup in the B2B Area
11.00 - 11.45 Deep Dives #1 [EOS] Room Paris
11.15 - 12.10 User Session / Market Spotlights at Expert Stage
11.45 - 12.30 Deep Dive #2 [HP] Room Strasbourg

11.15 - 11.55

Politics, standards and ecosystems

IMPULSE PANEL | Q&A | CROSS-INDUSTRY

Towards a sustainable economy - the 3d printing impact

	Moderation and Introduction: Sherri Monroe Executive Director, AMGTA - Additive Manufacturer Green Trade Association
	Moderation and Introduction: Sherri Monroe Executive Director, AMGTA - Additive Manufacturer Green Trade Association
What if every drop counted? Looking at sustainability in inkjet
	Stefan Hollaender CEO, Quantica
What if every drop counted? Looking at sustainability in inkjet
	Stefan Hollaender CEO, Quantica
Sustainable printed lighting at scale
	Annette Steinbusch Head of I2M Project Office, Business Unit 3D Printing, Signify myCreation
Sustainable printed lighting at scale
	Annette Steinbusch Head of I2M Project Office, Business Unit 3D Printing, Signify myCreation
Joint discussion

11.55 - 12.15

Automation and volume production

KEYNOTE | Q&A | AUTOMOTIVE

Achieving reliable quality in highly flexible Metal-AM production at ZF

	Dr. Ignacio Lobo-Casanova Head of SMART Lightweight Process Technologies, ZF Group
	Dr. Ignacio Lobo-Casanova Head of SMART Lightweight Process Technologies, ZF Group
	Dr. Tim Wischeropp CEO, amsight GmbH
	Dr. Tim Wischeropp CEO, amsight GmbH

12.15 - 12.35

Short recharging break

12.30 - 13.00
Deep Dive #3 [Interspectral] Room Paris

12.35 - 13.35
TECH TALKS at Expert Stage

12.35 - 12.55Automation and volume production

KEYNOTE | Q&A | MECHANICAL ENGINEERING

AM meets special machinery: New horizons with metal 3D printing

	Dr. Tim Pohl Director New Technologies & Sustainability , Reifenhäuser Group
	Dr. Tim Pohl Director New Technologies & Sustainability , Reifenhäuser Group
	Jan-Steffen Hoetter Director Global Business Development, Lightway GmbH
	Jan-Steffen Hoetter Director Global Business Development, Lightway GmbH

12.55 - 13.10Automation and volume production

PRESENTATION | ARCHITECTURE

Scalability and sustainability: How 3d printing is revolutionizing architecture

Arthur Mamou-Mani
CEO & Founder, Mamou-Mani Architects
Arthur Mamou-Mani
CEO & Founder, Mamou-Mani Architects

13.10 - 13.40

3d printing innovations

OUTLOOK SESSION | PANEL | CROSS-INDUSTRY

Emerging AM technologies and game-changing applications in the next few years

	Moderation: Dr. Chongliang Zhong Head of Department Additive Manufacturing, Fraunhofer IFAM
	Moderation: Dr. Chongliang Zhong Head of Department Additive Manufacturing, Fraunhofer IFAM
	Bart van der Schueren CTO & EVP, Materialise
	Bart van der Schueren CTO & EVP, Materialise
	Will Richardson CEO, Wayland Additive
	Will Richardson CEO, Wayland Additive
	Omer Sagi VP Products & Business Development, Tritone
	Omer Sagi VP Products & Business Development, Tritone

13.40 - 15.00Networking

Farewell lunch and networking
15.00 - 17.30

EXCURSIONS | Q&A

4 AM tours through Berlin to inspiring 3d printing sites in the capital

Expert Stage

11.15 - 11.50

Expert Stage [parallel session]

PRESENTATIONS | Q&A

User session

	Moderation: Stefan Ritt Lecturer, Technical University of Luebeck & AMUG Dino
	Moderation: Stefan Ritt Lecturer, Technical University of Luebeck & AMUG Dino
11.15 - 11.30 EOS M300 as the heart of the QI living lab: Advancing with digital process chains
	Dr. Kai Hilgenberg Head of Additive Manufacturing of Metallic Components, Federal Institute for Materials Research and Testing (BAM)
11.15 - 11.30 EOS M300 as the heart of the QI living lab: Advancing with digital process chains
	Dr. Kai Hilgenberg Head of Additive Manufacturing of Metallic Components, Federal Institute for Materials Research and Testing (BAM)
	Dr. Tina Schlingmann Regional Director EMEA, EOS GmbH
	Dr. Tina Schlingmann Regional Director EMEA, EOS GmbH
11.30 - 11.40 The potential of EBM for challenging materials and applications - our experience with the JEOL JAM-5200EBM
	Prof. Dr. Peter Mayr Head of the Chair of Materials Engineering of Additive Manufacturing, Technical University of Munich
11.30 - 11.40 The potential of EBM for challenging materials and applications - our experience with the JEOL JAM-5200EBM
	Prof. Dr. Peter Mayr Head of the Chair of Materials Engineering of Additive Manufacturing, Technical University of Munich
	collaborative partner of JEOL
	collaborative partner of JEOL
11.40 - 11.50 Additive manufacturing design potentials for vehicle conception
	Daniel Fuchs Project Lead Design for Additive Manufacturing, Volkswagen AG
11.40 - 11.50 Additive manufacturing design potentials for vehicle conception
	Daniel Fuchs Project Lead Design for Additive Manufacturing, Volkswagen AG

11.50 - 12.10

Expert Stage [parallel session]

PRESENTATIONS | Q&A

Market spotlights: What's happening in Turkey and Kazakhstan?

11.50 - 12.00 The Turkish AM Market
	Davut Basaran Managing Director, Basaran Teknoloji
11.50 - 12.00 The Turkish AM Market
	Davut Basaran Managing Director, Basaran Teknoloji
12.00 - 12.10 Additive manufacturing in Kazakhstan
	Aliya Akatayeva Managing Director on Science and Innovation, Satbayev University
12.00 - 12.10 Additive manufacturing in Kazakhstan
	Aliya Akatayeva Managing Director on Science and Innovation, Satbayev University

12.35 - 13.35

Expert Stage [parallel session]

TECH TALKS

Exhibitors present latest innovations

	Moderation: Stefan Ritt Lecturer, Technical University of Luebeck & AMUG Dino
	Moderation: Stefan Ritt Lecturer, Technical University of Luebeck & AMUG Dino
12.35 - 12.45 Manufacture beyond the impossible
	Marta Mico Founder & Chief Business Officer, Supernova
12.35 - 12.45 Manufacture beyond the impossible
	Marta Mico Founder & Chief Business Officer, Supernova
12.45 - 12.55 Quality by design: Leveraging process simulation for a competitive edge
	Dr. Marcin Serdeczny Senior CFD Engineer, Flow Science Inc.
12.45 - 12.55 Quality by design: Leveraging process simulation for a competitive edge
	Dr. Marcin Serdeczny Senior CFD Engineer, Flow Science Inc.
12.55 - 13.05 Molten metal printing with the GMP300
	Dr. Johannes Glasschröder Team Leader AM, GROB-WERKE GmbH & Co. KG
12.55 - 13.05 Molten metal printing with the GMP300
	Dr. Johannes Glasschröder Team Leader AM, GROB-WERKE GmbH & Co. KG
13.05 - 13.15 Deployable Metal AM for industrial integration with MMD
	Dr. Jonas Galle CEO, ValCun
13.05 - 13.15 Deployable Metal AM for industrial integration with MMD
	Dr. Jonas Galle CEO, ValCun
13.15 - 13.25 Additive manufacturing capabilities for power engineering in the SpreeTec neXT structural change project
	Prof. Dr. Klaus Schricker Head of Chair Joining and Welding Technology, BTU Cottbus
13.15 - 13.25 Additive manufacturing capabilities for power engineering in the SpreeTec neXT structural change project
	Prof. Dr. Klaus Schricker Head of Chair Joining and Welding Technology, BTU Cottbus
13.25 - 13.35 International standardization in AM - An important strategic tool for the industry
	Stephan Braun Business Development Manager Additive Manufacturing, DIN / KSB SE & Co. KGaA
13.25 - 13.35 International standardization in AM - An important strategic tool for the industry
	Stephan Braun Business Development Manager Additive Manufacturing, DIN / KSB SE & Co. KGaA

Deep Dives

11.00 - 11.45Working Session [parallel session]

DEEP DIVE #1 | Q&A | Room Paris

Future of AM: Process innovations improving cost per part and print quality
Joerg Hamann
Process Engineer Metal, EOS GmbH
Joerg Hamann
Process Engineer Metal, EOS GmbH

Tino Pfalz
Process Engineer Metal, EOS GmbH
Tino Pfalz
Process Engineer Metal, EOS GmbH
11.45 - 12.30Working Session [parallel session]

DEEP DIVE #2 | Q&A | Room Strasbourg

Innovating Fire Safety: Exploring HP's new PA12 FR and applications
Fabian Schuster
3DP Application Engineer, HP Inc.
Fabian Schuster
3DP Application Engineer, HP Inc.
12.30 - 13.00Working Session [parallel session]

DEEP DIVE #3 | Q&A | Room Paris

In-process monitoring as an enabler for L-PBF serial production
Isabelle Hachette
CEO, Interspectral AB
Isabelle Hachette
CEO, Interspectral AB

Philip Sperling
Customer Account Manager, Interspectral AB
Philip Sperling
Customer Account Manager, Interspectral AB

Excursions

4 AM tours through Berlin to inspiring 3d printing sites in the capital

14.30 - 14.45

Meeting point & check-in for the tours: Conference counter

	Estrel Congress Center, Sonnenallee 225, 12057 Berlin Only included in All Access tickets. Pre-registration is neccessary. Busses leave at 3.00 pm.
	Estrel Congress Center, Sonnenallee 225, 12057 Berlin Only included in All Access tickets. Pre-registration is neccessary. Busses leave at 3.00 pm.

15.00 - 17.30

EXCURSIONS | Q&A

AM Tour 1: Gefertec
Visit to GEFERTEC - Insights in large volume metal printing using WAAM
Visit to GEFERTEC - Insights in large volume metal printing using WAAM
15.00 - 17.30

EXCURSIONS | Q&A

AM Tour 2: Quantica
Breaking Viscosity Barriers - Quantica's Advanced Inkjet Technology Tour
Breaking Viscosity Barriers - Quantica's Advanced Inkjet Technology Tour

15.00 - 17.30

EXCURSIONS | Q&A

AM Tour 3: BAM - Federal Institute for Materials Research and Testing

Visit to BAM \| German Federal Institute for Materials Research and Testing - Comprehensive expertise and excellent research infrastructure
	Visit to BAM \| German Federal Institute for Materials Research and Testing - Comprehensive expertise and excellent research infrastructure

15.00 - 17.30

EXCURSIONS | Q&A

AM Tour 4: BMW Group Plant Berlin - BMW Motorcycle Plant

Experience the production of the legendary BMW motorcycles up close, including a look inside the Rapid Prototyping Center
	Experience the production of the legendary BMW motorcycles up close, including a look inside the Rapid Prototyping Center

	Daniel Wäldchen Member of the Executive Board, IPM AG
	Daniel Wäldchen Member of the Executive Board, IPM AG

	Dr. Jens Holtmannspoetter Branch Head of Materials, Structures, Engineering, Bundeswehr
	Dr. Jens Holtmannspoetter Branch Head of Materials, Structures, Engineering, Bundeswehr

	Dr. Simone Bernardini CTO, EME Extreme Manufacturing Engineering
	Dr. Simone Bernardini CTO, EME Extreme Manufacturing Engineering
	in cooperation with
	in cooperation with

Impulse Talk
	Brigitte de Vet-Veithen CEO, Materialise
Impulse Talk
	Brigitte de Vet-Veithen CEO, Materialise

Agenda

March 16 | Pre-Networking Evening Event

March 17-18 | Conference, exhibition & B2B matchmaking, AM tours

Boosting AM applications in industrial production

Special Networking Opportunities

Agenda

Day 1 | Monday, March 17, 2025

Main Stage

Check-in, morning coffee and networking in the exhibition

Welcome and networking kick-off

KEYNOTE | Q&A | CONSUMER GOODSScaling AM production through collaboration: Unlocking new possibilities in sport applications with "Something Added"

KEYNOTE | Q&A | CONSUMER GOODSAdditive Manufacturing at scale - AM for consumer goods: The case of The LEGO Group

PANEL DISCUSSION | Q&A | CROSS-INDUSTRYBoosting AM series application: European R&D and funding programs in the global race

Coffee break and networking in the exhibition

PANEL | Q&A | TRANSPORTThe potential super user industry public transport: Status quo and demands for the next years

KEYNOTE | Q&A | DEFENSEAdditive manufacturing for defense applications - Mission (im)possible?

KEYNOTE | Q&A | DEFENSE AM for defense - An OEM perspective

PRESENTATION | TRANSPORT Reinventing roller coasters - Using an end-to-end metal AM process to improve boogies for roller coaster trains

Women in AM Luncheon: 50+ female AM leaders meet and discuss

Lunch break and networking in the exhibition

KEYNOTE | Q&A | ENERGY Serial production of gas turbine components: From material and process development to quality control and cost optimization

IMPULSE SESSION | Q&A | CROSS-INDUSTRYAM meets AI - what to expect?

Coffee break and networking in the exhibition

PANEL | Q&A | DEFENSEThe role of AM in defense logistics

Coffee break and networking in the exhibition

EXPERT INTERVIEW | Q&A | CROSS-INDUSTRYDriving innovation in material solutions for Additive Manufacturing

KEYNOTE | Q&A | AUTOMOTIVE How IT projects fail in additive manufacturing

AFTER WORK PARTYEvening reception in the exhibition with flying dinner, cocktails, music and networking

Expert Stage

PRESENTATIONSAMBER [Additive Manufacturing in Berlin-Brandenburg] project presentations

TECH TALKSExhibitors present latest innovations

TECH TALKSExhibitors present latest innovations

INDUSTRY MEETUPS

Workshops & Small Groups

Women in AM Luncheon: 50+ female AM leaders meet and discuss

WORKSHOP #1 | Room ParisApplying AM to the factory floor [1] High-impact AM use cases[2] Overcoming Barriers to AM Adoption[3] Scaling AM from Prototyping to Series Production[4] Ensuring Quality, Certification, and Standards in AM[5] The AM-Enabled Smart Factory of the Future

Day 2 | Tuesday, March 18, 2025

Main Stage

Check-in, morning coffee and networking in the exhibition

Day 2 Opening: Recap and market outlook

KEYNOTE | Q&A | AEROSPACEBeyond earth: Advancing space technology with metal AM

KEYNOTE | Q&A | AVIATIONDirected Energy Deposition (DED) in serial production for the A350 - Replacing titanium forged parts

PANEL | Q&A | CROSS-INDUSTRYFuture of design and engineering workflows for advanced part manufacturing

Coffee break and networking in the exhibition

IMPULSE PANEL | Q&A | CROSS-INDUSTRYTowards a sustainable economy - the 3d printing impact

KEYNOTE | Q&A | AUTOMOTIVEAchieving reliable quality in highly flexible Metal-AM production at ZF

Short recharging break

KEYNOTE | Q&A | MECHANICAL ENGINEERINGAM meets special machinery: New horizons with metal 3D printing

PRESENTATION | ARCHITECTUREScalability and sustainability: How 3d printing is revolutionizing architecture

OUTLOOK SESSION | PANEL | CROSS-INDUSTRYEmerging AM technologies and game-changing applications in the next few years

Farewell lunch and networking

EXCURSIONS | Q&A 4 AM tours through Berlin to inspiring 3d printing sites in the capital

Expert Stage

PRESENTATIONS | Q&A User session

PRESENTATIONS | Q&AMarket spotlights: What's happening in Turkey and Kazakhstan?

TECH TALKSExhibitors present latest innovations

Deep Dives

DEEP DIVE #1 | Q&A | Room ParisFuture of AM: Process innovations improving cost per part and print quality

DEEP DIVE #2 | Q&A | Room StrasbourgInnovating Fire Safety: Exploring HP's new PA12 FR and applications

DEEP DIVE #3 | Q&A | Room ParisIn-process monitoring as an enabler for L-PBF serial production

Excursions

4 AM tours through Berlin to inspiring 3d printing sites in the capital

Meeting point & check-in for the tours: Conference counter

EXCURSIONS | Q&A AM Tour 1: Gefertec

EXCURSIONS | Q&A AM Tour 2: Quantica

EXCURSIONS | Q&A AM Tour 3: BAM - Federal Institute for Materials Research and Testing

EXCURSIONS | Q&A AM Tour 4: BMW Group Plant Berlin - BMW Motorcycle Plant

KEYNOTE | Q&A | CONSUMER GOODS

Scaling AM production through collaboration: Unlocking new possibilities in sport applications with "Something Added"

KEYNOTE | Q&A | CONSUMER GOODS

Additive Manufacturing at scale - AM for consumer goods: The case of The LEGO Group

PANEL DISCUSSION | Q&A | CROSS-INDUSTRY

Boosting AM series application: European R&D and funding programs in the global race

PANEL | Q&A | TRANSPORT

The potential super user industry public transport: Status quo and demands for the next years

KEYNOTE | Q&A | DEFENSE

Additive manufacturing for defense applications - Mission (im)possible?

KEYNOTE | Q&A | DEFENSE

AM for defense - An OEM perspective

PRESENTATION | TRANSPORT

Reinventing roller coasters - Using an end-to-end metal AM process to improve boogies for roller coaster trains

KEYNOTE | Q&A | ENERGY

Serial production of gas turbine components: From material and process development to quality control and cost optimization

IMPULSE SESSION | Q&A | CROSS-INDUSTRY

AM meets AI - what to expect?

PANEL | Q&A | DEFENSE

The role of AM in defense logistics

EXPERT INTERVIEW | Q&A | CROSS-INDUSTRY

Driving innovation in material solutions for Additive Manufacturing

KEYNOTE | Q&A | AUTOMOTIVE

How IT projects fail in additive manufacturing

AFTER WORK PARTY

Evening reception in the exhibition with flying dinner, cocktails, music and networking

PRESENTATIONS

AMBER [Additive Manufacturing in Berlin-Brandenburg] project presentations

TECH TALKS

Exhibitors present latest innovations

TECH TALKS

Exhibitors present latest innovations

WORKSHOP #1 | Room Paris

Applying AM to the factory floor

[1] High-impact AM use cases
[2] Overcoming Barriers to AM Adoption
[3] Scaling AM from Prototyping to Series Production
[4] Ensuring Quality, Certification, and Standards in AM
[5] The AM-Enabled Smart Factory of the Future

KEYNOTE | Q&A | AEROSPACE

Beyond earth: Advancing space technology with metal AM

KEYNOTE | Q&A | AVIATION

Directed Energy Deposition (DED) in serial production for the A350 - Replacing titanium forged parts

PANEL | Q&A | CROSS-INDUSTRY

Future of design and engineering workflows for advanced part manufacturing

IMPULSE PANEL | Q&A | CROSS-INDUSTRY

Towards a sustainable economy - the 3d printing impact

KEYNOTE | Q&A | AUTOMOTIVE

Achieving reliable quality in highly flexible Metal-AM production at ZF

KEYNOTE | Q&A | MECHANICAL ENGINEERING

AM meets special machinery: New horizons with metal 3D printing

PRESENTATION | ARCHITECTURE

Scalability and sustainability: How 3d printing is revolutionizing architecture

OUTLOOK SESSION | PANEL | CROSS-INDUSTRY

Emerging AM technologies and game-changing applications in the next few years

EXCURSIONS | Q&A

4 AM tours through Berlin to inspiring 3d printing sites in the capital

PRESENTATIONS | Q&A

User session

PRESENTATIONS | Q&A

Market spotlights: What's happening in Turkey and Kazakhstan?

TECH TALKS

Exhibitors present latest innovations

DEEP DIVE #1 | Q&A | Room Paris

Future of AM: Process innovations improving cost per part and print quality

DEEP DIVE #2 | Q&A | Room Strasbourg

Innovating Fire Safety: Exploring HP's new PA12 FR and applications

DEEP DIVE #3 | Q&A | Room Paris

In-process monitoring as an enabler for L-PBF serial production

EXCURSIONS | Q&A

AM Tour 1: Gefertec

EXCURSIONS | Q&A

AM Tour 2: Quantica

EXCURSIONS | Q&A

AM Tour 3: BAM - Federal Institute for Materials Research and Testing

EXCURSIONS | Q&A

AM Tour 4: BMW Group Plant Berlin - BMW Motorcycle Plant